Description

This is a modded version of this device:

http://www.maxforlive.com/library/device/2729/volca-sample-controller

I am by no means a Max expert so everything I did might be a little unconventional, nevertheless it works flawlessly in my case.

If you know your way around Max then you can surely refine it..

I added a few goodies:

-A toggle for the Pitch Keytracking

-Another keytracking mode for controlling the start point (MPC style chops on your volca!)

-Possibility to assign the velocity to the volume, the filter, the decay and the length, with adjustable amount. (Hell!Why not?)

-A toggle for bypassing altogether the pitch parameter. (useful if you want to use the semitone stepped pitch using the hardware unit and not having the controller accidentally mess your settings. Default is bypassed)

-Took inspiration from this:

http://www.maxforlive.com/library/device/2747/volca-sample-controller-happy-tosh-edit

and I also placed the knobs in the same fashion as the original unit.

-Made all parameters 0-127 for easier manual recall on the hardware if necessary.

Note:

-THE VELOCITY AMOUNT KNOBS WORK BACKWARDS!!!

So in the default (full open) position is no velocity sensitivity. (keeping brainwaves exercised)

-With the amount parameters you can only define a higher minimum, not a lower maximum (I'll add this once I figure it out properly)