Description

This is a addition to the other Voyager m4l patch. I added my patch memory code to it to enhance the device. The original device is below

http://www.maxforlive.com/library/device/1033/mosco-moog-voyager

I used that patch to start and added to it. This patch now allows you to recall patches from your Voyager. They are stored in the device in a matrix file. This way if you change he patch on the Voyager or from Live the controls are in the same spots in the m4l patch. I find this handy when scanning through presets. You can download my matrix file and sysex files to get start below.

Here is the Jit.matrix file

https://dl.dropboxusercontent.com/u/1620676/All%20Banks%20matrix%20File.jxf.jit

Here are all the banks exported from the Voyager

https://dl.dropboxusercontent.com/u/1620676/Voyager%20Bank%20Dumps.zip

Here are the Moog Editor SoundTower Files if you have the editor.

https://dl.dropboxusercontent.com/u/1620676/Voyager%20SoundTower%20Files.zip

If you do not have the SoundTower editor the one zip file above is each bank separately. You can then load them each individually into your Voyager so all the banks line up. Here is the order I had to do things.

1) Set Voyager to receive presets. Make sure you are on the bank you want to receive presets.

2) Send that bank from Sysex librarian to the Voyager.

3) Get the Voyager into bank B. Set Voyager to receive presets. Send Bank B sysex from Sysex librarian to Voyager.

Repeat for all banks.

There is a youtube video explaining what you need to do to store the matrix file that will be read on startup below.

https://www.youtube.com/watch?v=gLZ2vfT8drk&feature=youtu.be