a better search for max devices
ATC1 control screenshot

ATC1 control

by djjackrock

A midi plugin to control most parameters on the Studio Elect...

View on maxforlive.com

Type
MIDI Effect
Author
djjackrock
Version
0.1
License
None
Live version
8.2.1
Downloads
508
Updated
No Updates

Description

A midi plugin to control most parameters on the Studio Electronics ATC-1.

I pretty much based this on delaneyparker's "FM JoMoX AiR Base 99 Control" (http://www.maxforlive.com/library/device.php?id=244).

All I did was remap the CC values to match the ATC-1 and change the layout.

I also found some extra CC's not mentioned in the manual in this thread on Gearslutz -> http://www.gearslutz.com/board/electronic-music-instruments-electronic-music-production/258061-studio-electronics-atc-1-editor.html

Unfortunately, not all of the ATC-1's parameters are accessible via MIDI.

For example, the target mappings for LFO's and Xmod need to be set on the device.

Have fun!

---

http://www.jackrock.dk

http://www.soundcloud.com/jack-rock/

Comments (2)

  • sawanotsuru · November 22 2010
    yes! thanks so much :D
  • markeeledge · October 11 2016
    PLEASE PLEASE PLEASE DO ONE FOR STUDIO ELECTRONIC RED EYE SE-1X :)
    You can't access the oscillator mix levels from the front panel of the unit (which is a ball ache)! and you have to toggle the envelopes to control 3&4 on the front panel (also annoying and you can't see the setting)
    So a little mixer section for the 5 mix levels would be amazing!
    and 4 envelopes adsr with graphic would also be amazing!
    Here are the midi controller numbers :)
    54 Oscillator 1 frequency
    55 Oscillator 1 triangle waveform on/off
    56 Oscillator 1 sawtooth waveform on/off
    57 Oscillator 1 square waveform on/off
    58 Oscillator 1 pulse width
    59 Oscillator 2 frequency
    60 Oscillator 2 triangle waveform on/off
    61 Oscillator 2 sawtooth waveform on/off
    62 Oscillator 2 square waveform on/off
    63 Oscillator 2 pulse width
    70 Oscillator 3 frequency
    71 Oscillator 3 triangle waveform on/off
    72 Oscillator 3 sawtooth waveform on/off
    73 Oscillator 3 square waveform on/off
    74 Oscillator 3 pulse width
    80 LFO 1 rate
    81 LFO 1 depth
    82 LFO 2 rate
    83 LFO 2 depth
    85 LFO 3 rate
    86 LFO 3 depth
    87 Oscillator 1 mix level
    88 Oscillator 2 mix level
    89 Oscillator 3 mix level
    90 Noise mix level
    91 Ring mod mix level
    92 VCF frequency
    93 VCF resonance
    94 VCF tracking
    95 Envelope 1 amount
    102 Envelope 1 attack
    103 Envelope 1 decay
    104 Envelope 1 sustain
    105 Envelope 1 release
    106 Envelope 2 attack
    107 Envelope 2 decay
    108 Envelope 2 sustain
    109 Envelope 2 release
    110 Envelope 3 attack
    111 Envelope 3 decay
    112 Envelope 3 sustain
    113 Envelope 3 release
    114 Envelope 3 amount
    115 Envelope 4 attack
    116 Envelope 4 decay
    117 Envelope 4 sustain
    118 Envelope 4 release
    119 Envelope 4 amount

← Back to search