Description

Name: Parallel Step Counter.

Format n System: Max For Live Device / MIDI Effect / Max 9.1.0 or Higher.

Author: Andromeda.

Profile: A parallel sequencer without too many pitch variations, which means that there is not much freedom in pitch controling.

Explicate:

·Sidebar: To control basic parameters.

1.”Sync/Allo”: switch between “sync to your DAW” and “manually change the speed with the slider below”.

2.”Step[ms]”: manually change the global speed in milliseconds when “Allo” is selected.

·Mainview: There are 2 sequencer groups, a purple one and an orange one, as you can see. They have completely equivalent parameters, so we only look at the purple side.

1.”1 Shift”: It’s used to select witch independent sequencer on the left group you want to use. Actually, each panel on the left is an independent sequencer. For example, selecting “4” with “1 shift” corresponds to activating the panel of the corresponding length in the left. In addition, each sequencer group has a maximum of ten steps to use.

2.The Sliders: set the step size for each independent sequencer.

3.”Affix on”: When the value is “1”, an additional MIDI signal will be sent after each loop ends.

4.”Note[Main]”: set the desired pitch.

5.”Note[Aff]”: When the value of “Affix on” is “1”, you can change the pitch of the additional signal with this widget.

6.”Gate”: note length.