Description

Name: 4-Seq

Profile: 4 independent sequencers with basic sequential functions.

Author: Andromeda.

Explicate:

·Sidebar: To control basic parameters.

1.Preset place: to store your completed things immediately (shift+click=store,click=call). There are already four pre

stored presets here.

2.”Velo”: the velocity of all notes.

3.”Dura”: the duration of all notes.

4.”Integrate/Separate”: switch between “use all 4 seqs” and “choose only one from those four”.

5.”Shft”: when “Separate” is on, it’s used to choose witch seq you want to use.

6.”Sc.”: The pitch range of each cell, with the upper slider defining the value when the cell is infinitely close to 0 (the cell always outputs 0 when the value is 0), and the lower slider defining the value when the cell is turned to its maximum.

7.”Ret”: choose to keep integers or float numbers.

·Mainview: These four sequencers each have a color, corresponding to the same colored dials.

1.4 dials on the left: They are used to adjust every seq’s speed, with 8 gears available.

2.4 sequencers: drag each cell to adjust its pitch value. The bright lines above indicates the current position of the sequencers.