Description

MIDI controller for the Moog Voyager XL

This is a derivative work of MOSCO Moog Voyager v1.0 (http://www.maxforlive.com/library/device/1033/mosco-moog-voyager)

This extends Roel's device with the following:

* Additional LFO2 parameters for the XL, many of which are only available through MIDI

* Full Push 2 mapping

* Moog-styled XL interface

* Minor bugfixes in parameter names

* Updated patcher layout for easier debugging and reverse engineering by future tinkerers

SETUP:

Insert a MIDI track and build a device chain with Voyager XL MIDI Controller first, then External Instrument pointing to your Voyager XL's MIDI input port and receiving audio from the Voyager XL main out(s). Verify the XL is receiving changes from the controller, then set the LFO2 MIDI channel (top right corner). CC assignments for LFO2 do not conflict with the main Voyager MIDI engine, so the channel can be the same but must be set each time the Voyager XL is powered on.

IMPORTANT: Turn off MIDI merge on the Voyager XL if you use it as the MIDI input device for the Ableton MIDI track, otherwise you will create a MIDI loop and end up frustrated for hours like me. :)

TESTED IN THE FOLLOWING LIVE/MAX VERSIONS:

* 10.0.6 with Max 8.0.2

* 10.1.1 with Max 8.0.4

* Not compatible with Live 8, may not work with Live 9

V1.1 Updates:

* Fixed CC values for some controls

* Cleaned up patchers to ensure portability/compatibility

TBD:

* Preset management

PLEASE REPORT ANY BUGS BELOW!