Sends Follower. Send Level Modulation

Description

Turn any send into a performance modulator.

Video presentation → https://www.youtube.com/watch?v=1xYVGh-SX_k

Website → https://fadercraft.com/m4l-sf

Sends Follower reads a send knob’s position – the control value, not the audio – and turns it into a control signal you can map to anything in your set. Move the send – a knob you already have on your controller – and it drives filter cutoff, drive, reverb size, a dozen parameters at once. You play the send; the device follows your hand. Deterministic, musical, repeatable.

It reads the send control value, not the audio – so your signal path stays untouched and the result is always predictable.

Two devices in the pack:

Sends Follower – Return – drop it on a return track. It watches every track’s send to that return and sums them into one value (Peak = the loudest send, or Total = all sends combined). The harder the set pushes into that return, the more the modulation opens. One knob per track, one shared destination.

Sends Follower – Track – drop it on a regular track. It follows that track’s own send, so each track gets its own independent performance modulator from its send knob.

Map anything, set the range:

An embedded multi-map panel gives you mapping slots. Click Map, then click any parameter in your set. Set Min/Max per slot as percentages and invert values if needed. The follow value scales into that window, so one send move can open a filter halfway, push drive to the top, and nudge reverb a touch – all at once, all under your fingers.

Details:

* Native live.remote~ modulation – clean, low-CPU

* Reads the send control value only – never processes or blocks your audio

* Self-detects which return it sits on

* Peak / Total mode, saved with the device and your presets

* Built-in update notifier

* Works in Live 11+ / Max 8+

Promo code LAUNCH – get 20% off