WALRUS Audio R1 reverb MIDI controller
This device is used to control the Walrus R1 pedal. I...
- Type
- MIDI Effect
- Author
- Sundrugs
- Version
- 0.9.2
- License
- None
- Live version
- 11.0.6
- Max version
- 8.1.11
- Downloads
- 164
- Updated
- 2021-09-24
WALRUS Audio R1 reverb MIDI controller is a MIDI Effect for Ableton Live by Sundrugs, distributed as freeware, with no license specified by the author. It targets Live 11.0.6 and Max 8.1.11. On maxforlive.com it has 164 downloads. First published 2021-09-20, last updated 2021-09-24.
New to Max for Live? Read what MIDI Effects do, how device licenses work, how to install a device.
Description
This device is used to control the Walrus R1 pedal.
Important! Before first use make sure, your pedal has set right MIDI channel. From manual:
1. Hold down both stomp switches at power up then release once the LEDs begin flashing white.
2. Now send a MIDI Program Change message on the desired MIDI channel for the pedal.
3. The LEDs will flash green momentarily, and the pedal will save that MIDI channel and only respond to messages on that channel until the user changes it again.
This is a beta version of the plugin so feel free to write some comments :)